Iwona M Jasiuk

Research Interests

• Computational mechanics
• Bone mechanics
• Biomechanics
• Additive manufacturing
• Architectured materials
• Biological materials
• Composite materials
• Micromechanics
• Mechanics of materials

Research Statement

Professor Jasiuk studies engineering and biological materials. She investigates materials theoretically and experimentally and designs new advanced materials based on bioinspiration for various medical and technological applications. The engineering materials of interest include composites and nanocomposites, polymers, and alloys for aerospace, automotive, and energy applications. The biological materials studies address the mechanics of bone and hoof. She is also designing new bioinspired materials and 3D printing them using various additive manufacturing techniques. A project on bone aims to explain the mechanics of bone at different structural scales to obtain predictive tools for healthy and diseased bone. She is also exploring computational and non-invasive experimental tools for use in clinical settings to diagnose bone health. A project on natural materials investigates a hoof wall and hoof-inspired materials. Professor Jasiuk is studying, jointly with Professor Marc Meyers from the University of California at San Diego, the hoof wall's structure, composition, and mechanical properties at different structural levels. They are also designing hoof-inspired impact-resistant materials for various engineering applications. The National Science Foundation (NSF) sponsors this project. In a third project, she develops, manufactures, characterizes, and models novel architectured cellular bioinspired multifunctional materials. She employs different additive manufacturing techniques to create models for testing and investigates their mechanical, electrical, thermal, acoustic, and electromagnetic properties. Another project addresses novel composite materials and structures for marine turbine blades for energy harvesting with Dr. Leo Chamorro, ATSP Innovations, and the University of New Hampshire. Department of Energy supports this project. Finally, Professor Jasiuk has been a site director of the NSF I/UCRC Center on Novel High Voltage/Temperature Materials and Structures. She designs and explores novel high-temperature composite and nanocomposite materials for aerospace applications and high-conductivity alloys for power transmission.

Undergraduate Research Opportunities

Several projects are available on the characterization and modeling of materials.

Books Edited or Co-Edited (Original Editions)

• Soboyejo, W., A. Evans, I. Jasiuk, and Y.-C. Chen, eds., Mechanics of Cellular and Porous Materials – Special Issue of Mechanics of Materials, 36, 2004.
• Goncalves, I. Jasiuk, and L. Bevilacqua, eds., Mechanics Pan American - Special Issue of the International Journal of Solids and Structures, 38:10-13, 2001.
• Weber, H. I., P. B. Goncalves, I. Jasiuk, D. Pamploma, C. Steele, and L. Bevilacqua, eds., "Applied Mechanics in the Americas Volume 8, Proceedings of Sixth Pan-American Congress of Applied Mechanics and Eight International Conference on Dynamic Problems in Mechanics," AAM and ABCM, Rio di Janeiro, Brazil, 1999.
• Goncalves, P. B., I. Jasiuk, D. Pamploma, C. Steele, H. I. Weber, and L. Bevilacqua, eds., "Applied Mechanics in the Americas Volumes 6 & 7, Proceedings of Sixth Pan-American Congress of Applied Mechanics and Eight International Conference on Dynamic Problems in Mechanics," AAM and ABCM, Rio de Janeiro, Brazil, 1999.
• Jasiuk, I. and M. Ostoja-Starzewski, Guest Editors, Micromechanics of Random Media II - Special Issue of International Journal of Solids and Structures, Vol. 35:19, 1998.
• Ostoja-Starzewski, M. and I. Jasiuk, Eds., Micromechanics of Random Media - Special Issue of Applied Mechanics Reviews, Vol. 47(1, Part 2), 1994.

Chapters in Books

• Jasiuk, I., "Micromechanics of Bone modeled as a Composite Material," in Micromechanics and Nanomechanics of Composite Solids, S. Meguid and G. Weng, ed., pages 281-306, Springer, 2018.
• Jasiuk, I. and M. Ostoja-Starzewski, “Two-versus Three-Dimensional Classical Elasticity,” Chapter 5 in Microstructural Randomness and Scaling in Mechanics of Materials, M. Ostoja-Starzewski, ed., The Chapman & Hall/CRC Modern Mechanics and Mathematics Series, 2007.
• Jasiuk, I. and M. Ostoja-Starzewski, “From Lattices and Composites to Micropolar Continua,” Chapter 7 in Micromechanics and Nanoscale Effects: MEMS, Multi-Scale Materials and Micro-Flows, V. M. Harik and L.-S. Luo, eds., Kluwer Academic Publishers, Amsterdam, 175-212, 2004.

Selected Articles in Journals

• J. He, S. Koric, D. Abueidda, A. Najafi, I. Jasiuk (2024), “Geom-DeepONet: A point-cloud-based deep operator network for field predictions on 3D parameterized geometries,” Computer Methods in Applied Mechanics and Engineering, 429, 117130.
• L. N Jayakody, S. D. Hamilton-Brehm, K. B Anderson, M. E. McCarroll, G. L. Aruma Baduge, P. Sivakumar, K. Majumder, I. M. Jasiuk, R. R. Tannenbaum (2024), “Next-generation 3D-printed nutritious food derived from waste plastic and biomass," Trends in Biotechnology, 42(6), 799-800.
• C. Chadha, G. Olaivar, M.A. Mahrous, A.E. Patterson, I. Jasiuk (2024), “Exploring the effect of specimen size on elastic properties of fused-filament-fabrication-printed polycarbonate and thermoplastic polyurethane,” Materials, 17, 2677.
• M. A. Mahrous, M. A. Abdelghany, A. C. Constancio Trindade, M. Aboukhatwa, W. M. Kriven, I. M. Jasiuk (2024), “Investigating irradiation effects on metakaolin-based geopolymer, Construction and Building Materials,” 437, 136837.
• S. Kushwaha, J. Park, S. Koric, J. He, I. Jasiuk, D. Abueidda (2024), “Advanced deep operator networks to predict multiphysics solution fields in materials processing and additive manufacturing,” Additive Manufacturing, 88, 104266.
• J. He, S. Kushwaha, J. Park, S. Koric, D. Abueidda, I. Jasiuk (2024), “Predictions of transient vector solution fields with sequential deep operator network,” Acta Mechanica 235, 5257–5272.
• J. He, D. Pal, A. Najafi, D. Abueidda, S. Koric, I. Jasiuk (2024), “Material-response-informed DeepONet and its application to polycrystal stress–strain prediction in crystal plasticity,” JOM, online.
• S. Altamimi, D.W. Lee, I. Barsoum, R. Rowshan, I.M. Jasiuk, R.K. Abu Al-Rub, R. K. (2024), “ Stiffness, strength, anisotropy, and buckling of lattices derived from TPMS and Platonic and Archimedean solids. Mechanics of Advanced Materials and Structures, 1–28.
• A. E. Patterson, C. Chadha, I. M. Jasiuk, J. T. Allison (2024), “Impact of element layout and notching technique on the fracture toughness of FFF-processed thermoplastics, Procedia Structural Integrity,” 61, 148-155.
• C. Bonney, S. Pang, M. A. Meyers, I. Jasiuk (2024), “Viscoelastic properties of the equine hoof wall,” Acta Biomaterialia, 184, 264-272.
• S. Pang, M. A. Mahrous, A. C. Constancio Trindade, A. Kozych, N. Kale, W. M. Kriven, I. Jasiuk (2024), “Mechanical behavior of bio-inspired composites made of co-continuous geopolymer and 3D-printed polymer,” Applied Research, e202300097.
• T. Bak, D. StC. Black, P. Gannon, T. M. Gür, I. Jasiuk, S. A. Sherif, W. M. Sigmund, J. Nowotny (2024), "In situ surface monitoring of energy materials during processing: impact of defect disorder on surface versus bulk semiconducting properties of photocatalytic hematite (Fe2O3)," Energy Advances 3 (3), 614-624.
• J. He, S. Kushwaha, J. Park, S. Koric, D. Abueidda, I. Jasiuk (2024), “Sequential Deep Operator Networks (S-DeepONet) for predicting full-field solutions under time-dependent loads,” Engineering Applications of Artificial Intelligence, 127, 107258.
• S. Kushwaha, J. He, D. Abueidda, I. Jasiuk (2023), “Designing impact-resistant bio-inspired low-porosity structures using neural networks,” Journal of Materials Research and Technology, 27, 767-779.
• M. A. Mahrous, C. Chadha, P. L. Robins, C. Bonney, K. A. Boateng, M.A. Meyers, I. Jasiuk (2023),” Multimodule imaging of the hierarchical equine hoof wall porosity and structure,” Journal of Materials Research and Technology 26, 5535-5548,
• C. Chadha, J. He, D. Abueidda, S. Koric, E. Guleryuz, I. Jasiuk (2023) Improving the accuracy of the deep energy method. Acta Mechanica 234 (12), 5975-5998.
• B.S. Lazarus, R.K. Luu, S. Ruiz-Pérez, J.D.V. Barbosa, I. Jasiuk, M.A. Meyers (2023), “Equine Hoof Wall Deformation: Novel Aspects Revealed,” Small Structures 4, 2200402.
• B.S. Kolitha, S.K. Jayasekara, R. Tannenbaum, I.M. Jasiuk, L.N. Jayakody (2023), “Repurposing of waste PET by microbial biotransformation to functionalized materials for additive manufacturing,” Journal of Industrial Microbiology and Biotechnology 50, kuad010.
• S. Pang, I. Jasiuk (2023), “Correlation between reference point indentation and mechanical properties of 3D printed polymers, Review of Scientific Instruments 94, 085118
• A. E. Patterson, C. Chadha, I. M. Jasiuk, J. T. Allison (2023) "Tensile behavior of individual fibers and films made via material extrusion additive manufacturing," Next Materials, 1(1), 100002.
• J. He, S. Kushwaha, M.A. Mahrous, D. Abueidda, E. Faierson, I. Jasiuk (2023), “Size-dependence of AM Ti–6Al–4V: Experimental characterization and applications in thin-walled structures simulations,” Thin-Walled Structures, 185, 110722.
• M. Rezapourian, I. Jasiuk, M. Saarna, I. Hussainova (2023), "Selective laser melted Ti6Al4V Split-P TPMS lattices for bone tissue engineering, International Journal of Mechanical Sciences 251, 1 August 2023, 108353.
• J. He, D. Abueidda, R. Abu Al-Rub, S. Koric, I. Jasiuk (2023), "A deep learning energy-based method for classical elastoplasticity," International Journal of Plasticity 162, 103531
• J. He, S. Kushwaha, D. Abueidda, I. Jasiuk (2023), "Exploring the structure-property relations of thin-walled, 2D extruded lattices using neural networks," Computers & Structures 124, 277-278, 106940.
• J. He, C. Chadha, S. Kushwaha, S. Koric, D. Abueidda, I. Jasiuk (2023), "Deep energy method in topology optimization applications," Acta Mechanica, 234, 1365-1379.
• J. He, D. Abueidda, S. Koric, I. Jasiuk (2022), "On the use of graph neural networks and shape-function-based gradient computation in the deep energy method," International Journal for Numerical Methods in Engineering, 124, 864-879.
• C.S.A. Shiang, C. Bonney, B. Lazarus, M. Meyers, I. Jasiuk (2022), "Hierarchical modeling of elastic moduli of equine hoof wall," Journal of the Mechanical Behavior of Biomedical Materials 136, 105529.
• C. Chadha, K. James, I. M. Jasiuk, A. E Patterson (2022), "Extending the operating life of high-value thermoplastic components via on-demand patching and repair using fused filament fabrication," Journal of Manufacturing and Materials Processing, 6(5),103.
• J. He, S. Kushwaha, D. Abueidda, I Jasiuk (2022), "LatticeOPT: A heuristic topology optimization framework for thin-walled, 2D extruded lattices," Structural and Multidisciplinary Optimization 65, 308.
• B. S. Lazarus, R. K. Luu, S. Ruiz-Pérez, W. B. Almeida Bezerra, K. Becerra-Santamaria, V. Leung, V. H. Lopez Durazo, I. Jasiuk, J. D.V. Barbosa, M. A. Meyers (2022) Equine hoof wall: structure, properties, and bioinspired designs, Acta Biomaterialia, 151, 426-445.
• M. Rezapourian, N. Kamboj, I. Jasiuk, I. Hussainova (2022), “Biomimetic design of implants for long bone critical-sized defects,” Journal of the Mechanical Behavior of Biomedical Materials, 134, 105370.
• T. Bak, I. Jasiuk, W. M. Sigmund, M. Yamawaki, J. Nowotny (2022), “Defect chemistry of Titanium Dioxide: Evidence of the n p transition during cooling,” Journal of Physical Chemistry C, 126 (10), 5014-5021.
• A. E. Patterson, C. Chadha, I. M. Jasiuk (2022), “Manufacturing process-driven structured materials (MPDSMs): design and fabrication for extrusion-based additive manufacturing,” Rapid Prototyping Journal, 28(4), 716-731.
• S. Altamimi, D.-W. Lee, I. Barsoum, R. Rowshan, I. M. Jasiuk, R. K. Abu Al-Rub (2021), “On stiffness, strength, anisotropy, and buckling of 30 strut-based lattices with cubic crystal structures,” Advanced Engineering Materials 2021, 2101379.
• B. Lazarus, C. Chadha, A. Velasco-Hogan, J. D. V. Barbosa, I. Jasiuk, M. A. Meyers (2021), “Engineering with keratin: A functional material and a source of bioinspiration,” i-Science 24, 102798.
• A. E. Patterson, C. Chadha, I. M. Jasiuk, J. T. Allison (2021), "Fracture testing of polymer materials processed via fused filament fabrication: a survey of materials, methods, and design applications,” Progress in Additive Manufacturing, 6(4), 765-780.
• A. E. Patterson, C. Chadha, I. M. Jasiuk (2021), “Identification and mapping of manufacturability constraints for extrusion-based additive manufacturing,” Journal of Manufacturing and Materials Processing 5, 33.
• S. Pang, F.Y. Su, A. Green, J. Salim, J. McKittrick, and I. Jasiuk (2021), “Demineralization of cortical bone using several protocols and synthesis of a collagen scaffold,” Scientific Reports 11, 7012.
• A. Idkaidek, H. Schwarcz, I. Jasiuk (2021), “Modeling of bending and torsional stiffnesses of bone at sub-microscale: Effect of curved mineral lamellae,” Journal of Biomechanics 123, 110531.
• J. L. Meyer, P. Lan, S. Pang, K. Chui, J. Economy, I. Jasiuk (2021), “Reversible bonding via exchange reactions following atomic oxygen and proton exposure,” Journal of Adhesion Science and Technology 35(19), 2124-2141.
• D. W. Abueidda, Z. Kang, S. Koric, K. A. James, I. M. Jasiuk (2021), “Topology optimization for 3D elastoplastic architected materials using a path‐dependent adjoint method,” International Journal for Numerical Methods in Engineering 122(8), 1889-1910.
• S. Pang, H.P. Schwarcz, I Jasiuk (2021), “Interfacial bonding between mineral platelets in bone and its effect on mechanical properties of bone,” Journal of the Mechanical Behavior of Biomedical Materials 113, 104132.
• F. A. Sabet, S. Koric, A. Idkaidek, I. Jasiuk (2020), “High-performance computing comparison of implicit and explicit nonlinear finite element simulations of trabecular bone,” Computer Methods and Programs in Biomedicine 200, 105870.
• S. Pang, F. Y. Su, J. McKittrick, I Jasiuk (2020), "Deproteinized young bone reveals a continuous mineral phase and its contribution to mechanical properties with age,” Journal of Materials Research and Technology 9(6), 15421-15432.
• F. Y. Su, F. A. Sabet, K. Tang, S. Garner, S. Pang, M. Tolley, I. Jasiuk, J. McKittrick (2020), “Scale and size effects on apparent mechanical properties of additively manufactured two-phase composites with continuous or discontinuous phases,” Journal of Materials Research and Technology 9 (6), 14944-14960.
• B. S. Lazarus, A. Velasco-Hogan, T. Gómez-del Río, M. A. Meyers, I. Jasiuk (2020), “A review of impact resistant biological and bioinspired materials and structures,” Journal of Materials Research and Technology 9(6), 15705-15738.
• J. L. Meyer, P. Lan, M. Bakir, I. Jasiuk, J. Economy (2020), “Wide area reversible adhesive for in-space assembly,” Macromolecular Materials and Engineering 305 (7), 2000006.
• D. W. Abueidda, M. Elhebeary, C.-S. Shiang, R. K. Abu Al-Rub, I. M. Jasiuk (2020), “Compression and buckling of microarchitectured Neovius-lattice,” Extreme Mechanics Letters 37, 100688.
• M. Bakir, J. Meyer, S. Pang, J. Economy, I. Jasiuk (2020), “Merging versatile polymer chemistry with multifunctional nanoparticles: An overview of crosslinkable aromatic polyester matrix nanocomposites,” Soft Matter 16, 1389-1403.
• D. W. Abueidda, M. Almasri, R. Ammourah, U. Ravaioli, I. M. Jasiuk, and N. A. Sobh (2019), “Prediction and optimization of mechanical properties of composites using convolutional neural networks,” Composite Structures 227, 111264.
• A. Patterson, C. Chadha, I. Jasiuk, J. Allison (2019), “Design and repeatability analysis of desktop tool for rapid pre-cracking of notched ductile plastic fracture specimens,” Engineering Fracture Mechanics 217, 106536.
• J. L. Meyer, M. Bakir, P. Lan, J. Economy, I. Jasiuk, G. Bonhomme, A. A. Polycarpou (2019), “Reversible bonding of aromatic Thermosetting coPolyesters (ATSP) for in-space assembly,” Macromolecular Materials and Engineering, 304(4), 1800647.
• D. W. Abueidda, M. Elhebeary, C.-S. Shiang, S. Pang, R. K. Abu Al-Rub, I. M. Jasiuk (2019), “Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study,” Materials and Design, 165, 107597.
• Varnell, J.A., M. Bakir, A. M. DiAscro, X. Chen, S. Nilufar, I. Jasiuk, A. A. Gewirth (2019), “Understanding the influence of carbon addition on the corrosion behavior and mechanical properties of Al alloy “covetics”,” Journal of Materials Science 54 (3), 2668–2679.
• D.W. Abueidda, D.W., P. Karimi, J.-M. Jin, N.A. Sobh, I. M. Jasiuk, M. Ostoja-Starzewski (2018), “Shielding effectiveness and bandgaps of interpenetrating phase composites based on the Schwarz Primitive surface,” Journal of Applied Physics 124, 175102.
• Idkaidek, A., I. Jasiuk (2018), “Modeling of Osteoprobe indentation on bone,” Journal of the Mechanical Behavior of Biomedical Materials 90, 365-373.
• Bakir, M., J. L. Meyer, A. Sutrisno, J. Economy, I. Jasiuk (2018), Glass transition broadening via nonofiller-continguous polymer network in aromatic thermosetting copolyester nanocomposites, Journal of Applied Polymer Science: Part B, 46584 (1 of 6).
• Bakir, M., J. L. Meyer, A. Sutrisno, J. Economy, I. Jasiuk (2018), “Aromatic thermosetting copolyester bionanocomposites as reconfigurable bone substitute materials: Interfacial interactions between reinforcement particles and polymer network," Scientific Reports, 8:14869.
• Kozuch, C., I. Jasiuk (2018), “Optimization of structures made from composites with elliptical inclusions,” Journal of Applied Mechanics 85(12), 121006 (13 pages).
• Su, F.Y., S. Pang, Y. T. T. Ling, P. Shyu, E. Novitskaya, K. Seo, S. Lambert, K. Zarate, O. A. Graeve, I. Jasiuk, J. McKittrick (2018), “Deproteinization of cortical bone: Effects of different treatments,” Calcified Tissue International 103(5), 554-566.
• Sabet, F.A., F. Y. Su, J. McKittrick, I. Jasiuk (2018), “Mechanical properties of model two-phase composites with continuous compared to discontinuous phases,” Advanced Engineering Materials, 1800505 (1 of 6)
• Kocyigit, A., M. Bakir, O. Cifci, B. Enders, I. Jasiuk, M. Nayfeh (2018), “Imparting optical functionality to Aromatic Thermosetting Copolyester by luminescent silicon nanoparticles cross-linked via in situ thermal polymerization reaction,” European Polymer Journal 103, 351-361.
• Abueidda, D.W., I. Jasiuk, N.A. Sobh (2018), "Acoustic band gaps and elastic stiffness of PMMA cellular solids based on Triply Periodic Minimal Surfaces," Materials & Design 145, 20-27.
• Bakir, M., M. Elhebeary, J. Meyer, A. Sutrisno, J. Economy, I. Jasiuk (2018), “Interfacial liquid crystalline mesophase domain on carbon nanofillers in Aromatic Thermosetting Copolyester matrix,” Journal of Applied Polymer Science, 46584 (1 of 6).
• Idkaidek, A., S. Koric, I. Jasiuk (2018), "Fracture analysis of multi-osteon cortical bone using XFEM," Computational Mechanics, 62(2), 171-184.
• Kale, S., P. Karimi, F. A. Sabet, I. Jasiuk, M. Ostoja-Starzewski (2018), “Tunneling-percolation model of multicomponent nanocomposites", Journal of Applied Physics, 123, 085104.
• Bakir, M., J. L. Meyer, A. Sutrisno, J. Economy, I. Jasiuk (2018), “Nanofiller-conjugated percolating conductive network modified polymerization reaction characteristics of Aromatic Thermosetting Copolyester resin,” RSC Advances, 8 (9), 4946-4954.
• Jasiuk, I., D. Abueidda, C. Kozuch, S. Pang, F. Su, J. McKittrick (2018), "An overview on additive manufacturing of polymers," Journal of the Minerals, Metals and Materials Society (JOM), 70 (3), 275-283.
• Bakir, M., C. N. Henderson, J. L. Meyer, J. Oh, N. Miljkovic, M. Kumosa, J. Economy, I. Jasiuk (2018), “Effects of environmental aging on physical properties of Aromatic Thermosetting Copolyester matrix neat and nanocomposite foams,” Polymer Degradation and Stability, 147, 49-56.
• Taleb, M., I. Hussainova, R. Ivanov, and I. Jasiuk (2017), “Graphenated ceramic nanofibers for highly sensitive simultaneous detection of dopamine, uric acid and ascorbic acid,” Advanced Materials Letters 8(12), 1178−1183.
• Bakir, M., J. L. Meyer, I. Hussainova, A. Sutrisno, J. Economy, I. Jasiuk (2017), "Periodic functionalization of graphene-layered alumina nanofibers with Aromatic Thermosetting Copolyester via epitaxial step-growth polymerization," Macromolecular Chemistry and Physics, 1700338.
• Sabet, F.A., O. Jin, and S. Koric (2017), "Nonlinear micro-CT FE modeling of trabecular bone: Sensitivity of apparent response to tissue constitutive law," International Journal for Numerical Methods in Biomedical Engineering, e2941.
• Schwarcz, H., D. W. Abueidda, I. Jasiuk (2017), "The ultrastructure of bone and its relevance to mechanical properties," Frontiers in Physics: Biomedical Physics, 5, article 39.
• Bakir, M., J.L. Meyer, J. Economy, I. Jasiuk (2017), “Aromatic Thermosetting Copolyester nanocomposite foams: High thermal and mechanical performance lightweight structural materials,” Polymer, 123, 311-320.
• Valdez, M., C. Kozuch, E. J. Faierson, and I. Jasiuk (2017), “Induced porosity in Super Alloy 718 through the Laser Additive Manufacturing process: Microstructure and mechanical properties,” Journal of Alloys and Compounds, 725, 757-764.
• Bakir, M. and I. Jasiuk (2017), “Novel metal-carbon nanomaterials: A review on covetics,” Advanced Materials Letters, 8(9), 884-890.
• Hussainova,I., M. Drozdova, D. Pérez-Coll, F. Rubio-Marcos, I. Jasiuk, J. A.N.T. Soares, and M. A. Rodríguez (2017), “Electroconductive composite of zirconia and hybrid graphene/alumina nanofibers,” Journal of the European Ceramic Society, 37, 3713-3719.
• Idkaidek, A. and I. Jasiuk (2017), "Cortical bone fracture analysis using XFEM and Abaqus software - Case study," International Journal for Numerical Methods in Biomedical Engineering, e02809.
• Dragomir-Daescu, D., A. Rezaei, S. Uthamaraj, T. Rossman, J. T. Bronk, M. Bolander, V. Lambert, S. McEligot, R. Entwistle, H. Giambini, I. Jasiuk, M. J. Yaszemski, L. Lu (2017), “Proximal Cadaveric Femur Preparation for Fracture Strength Testing and Quantitative CT-Based Finite Element Analysis,” Journal of Visualized Experiments (JoVE), 121, ISSN: 1940-087X.
• Abueidda, D.W., F. A. Sabet, and I. Jasiuk (2017), “Modeling of Elasticity and Strength of Bone at Nanoscale,” Journal of Biomechanical Engineering, 139, 051006-1-10.
• Abueidda, D.W., M. Bakir, R. K. Abu Al-Rub, J. S. Bergström, N. A. Sobh, I. Jasiuk (2017), “Mechanical Properties of 3D Printed Polymeric Foams with Triply Periodic Minimal Surface Architectures,” Materials and Design, 122, 255-267.
• Bakir, M., E. Bahceci, J.L.Meyer, J. Economy, and I. Jasiuk (2017), "Aromatic Thermosetting Copolyester Foam Core and Aluminum Foam Face Three-Layer Sandwich Composite for Impact Energy Absorption," Materials Letters, 196, 288-291.
• Idkaidek, A., V. Agarwal, and I. Jasiuk (2017), "Finite Element Simulation of Reference Point Indentation on Bone," Journal of the Mechanical Behavior of Biomedical Materials, 65, 574-583.
• Karimi, P., M. Ostoja-Starzewski, and I. Jasiuk (2016), "Experimental and Computational Study of Shielding Effectiveness of Polycarbonate Carbon Nanocomposites," Journal of Applied Physics, 120, 145103-1-11.
• Bakir, M., J.L. Meyer, J. Economy, and I. Jasiuk (2016), “Heat Induced Polycondensation Reaction with Self-generated Blowing Agent Forming Aromatic Thermosetting Copolyester Foams,” Macromolecules, 49 (17), 6484-6496.
• O’Connor, D.T., K.I. Elkhodary, Y. Fouad, M.S. Greene, F.A. Sabet, J.Qian, Y. Zhang, W.K. Liu, and I. Jasiuk (2016), “Modeling Orthotropic Elasticity, Localized Plasticity and Fracture in Trabecular Bone,” Computational Mechanics, 58 (3), 423-439.
• Iftekhar Jaim, H. M., R.A. Isaacs, S. N. Rashkeev, D. P. Cole, M. LeMieux, I. Jasiuk, S. Nilufar, and L.G. Salamanca-Riba (2016), “Sp2 Carbon in Al- 6061 and Al-7075 Alloys in the Form of Crystalline Graphene Nanoribbons," Carbon, 107, 56-66.
• Kale, S., F. A. Sabet, I. Jasiuk, and M. Ostoja-Starzewski (2016), “Effect of Filler Alignment on Percolation in Polymer Nanocomposites using Tunneling Percolation Model,” Journal of Applied Physics 120, 045105.
• Barabash, R.I., V. Agarwal, S. Koric, I. Jasiuk, and J.Z. Tischler (2016), "Finite Element Simulation and X-ray Microdiffraction Study of Strain Partitioning in a Layered Cr-NiAl Nanocomposite," Journal of Applied Crystallography, 4351347 (11 pages).
• Dalaq, A. S., D. W. Abueidda, R. K. Abu Al-Rub, and I. Jasiuk (2016), “Finite Element Prediction of Effective Elastic Properties of Interpenetrating Phase Composites with Architectured 3D Sheet Reinforcements,” International Journal of Solids and Structures, 83, 169-182.
• Abueidda, D.W., R. K. Abu Al-Rub, A. S. Dalaq, D.-W. Lee, K. A. Khan, and I. Jasiuk (2016), “Effective Conductivities and Elastic Moduli of Foams with Triply Periodic Minimal Surfaces,” Mechanics of Materials, 95, 102-115.
• Sabet, F., A. N. Raeisi, E. Hamed, and I. Jasiuk (2016), "Multiscale Modeling of Bone Fracture and Strength - A Review," Interface Focus, 6 (1), 20150055.
• Baró, J., P. Shyu, S. Pang, I. Jasiuk, E. Vives, E. K. H. Salje, and A. Planes (2015), “Avalanche Criticality During Compression of Pig-Bones,” Physics Review E, 93, 053001.
• Kale, S., F. A. Sabet, I. Jasiuk, and M. Ostoja-Starzewski (2015), “Percolation Behavior of Polydisperse Prolate and Oblate Ellipsoids,” Journal of Applied Physics, 118, 154306.
• Idkaidek, A. and I. Jasiuk (2015), “Towards a High Speed 3D Nonlinear Soft Tissue Deformation Simulation using Abaqus Software,” Journal of Robotic Surgery, 9, 299-310.
• Abueidda, D.W., A. S. Dalaq, R. K. Abu Al-Rub, and I. Jasiuk (2015), “Micromechanical Finite Element Predictions of a Reduced Coefficient of Thermal Expansion for 3D Periodic Architectured Interpenetrating Phase Composites,” Composite Structures, 133, 85-97.
• Hamed, E., E. Novitskaya, J. Li, I. Jasiuk, and J. McKittrick (2015), "Experimentally-based Multiscale Model of the Elastic Modulus of Trabecular Bone and its Constituents," Materials Science and Engineering C 54, 207-216.
• Chittenden, M., A. R. Najafi, J. Li, and I. Jasiuk (2015), "Nanoindentation and Ash Content Study of Developing Porcine Cortical Bone," Journal of Mechanics in Medicine and Biology, 15 (5), 1550074.
• Lee, W. and I. Jasiuk (2014), “Effects of Freeze–Thaw and Micro-Computed Tomography Irradiation on Structure–Property Relations of Porcine Trabecular Bone,” Journal of Biomechanics, 47, 1495-1498.
• Setters, A. and I. Jasiuk (2014), “Towards a Standardized Reference Point Indentation Testing Procedure,” Journal of the Mechanical Behavior of Biomedical Materials, 34, 57-65.
• Burks, B., T. Wells, A. M. Setters, I. Jasiuk, and M. Kumosa (2013), “The Effect of Ozone and High Temperature on Polymer Degradation in Polymer Core Composite Conductors,” Polymer Degradation and Stability, 98 (11), 2282-2290.
• Lee, Y.-H. and I. Jasiuk (2013), “Apparent Elastic Properties of Random Fiber Networks," Computational Materials Science, 79, 715-723.
• Hamed, E. and I. Jasiuk (2013), “Multiscale Damage and Strength of Lamellar Bone Modeled by Cohesive Finite Elements,” Journal of the Mechanical Behavior of Biomedical Materials, 28, 94-110.
• Cameron, J.A., D.J. Milner, J.S. Lee, J. Cheng, N.X. Fang, and I. Jasiuk (2013), “Employing the Biology of Successful Fracture Repair to Heal Critical Size Bone Defects,” Current topics in microbiology and immunology, 367, 113-132.
• Jast, J. and I. Jasiuk (2013), “Age-related Changes in the 3D Hierarchical Structure of Rat Tibia Cortical Bone Characterized by High Resolution Micro-CT,” Journal of Applied Physiology, 114, (7), 923-933.
• Rasoulian, R., A. Raeisi Najafi, M. Chittenden, and I. Jasiuk (2013), “Reference Point Indentation Study of Age-Related Changes in Porcine Femoral Cortical Bone,” Journal of Biomechanics, 46, 1689-1696.
• Middleton, J., B. Burks, T. Wells, A. M. Setters, I. Jasiuk, P. Predecki, J. Hoffman, and M. Kumosa (2013), "The Effect of Ozone on Polymer Degradation in Polymer Core Composite Conductors," Polymer Degradation and Stability, 98, 436-445.
• Schreader, K.J., I. Bayer, D. J. Milner, E. Loth, and I. Jasiuk (2012), "A Polyurethane-based Nanocomposite Biocompatible Bone Adhesive," Journal of Applied Polymer Science, 127, 4974-4982.
• J. Feng, Chittenden, M., J. Schrider, M. Dickinson, and I. Jasiuk (2012), "Mechanical Properties of Porcine Femoral Cortical Bone Measured by Nanoindentation," Journal of Biomechanics, 45(10), 1775-1782.
• Hamed, E. and I. Jasiuk (2012), "Elastic Modeling of Bone at Nanostructural Level," Materials Science and Engineering R, 73(3-4), 27-49.
• Youkhanna, D., D. J. Griffon, P. Fredericks, D. Shaeffer, T. M. Fan, and I. M. Jasiuk (2012), "Bone Resorption Markers and Dual-Energy X-ray Absorptiometry in Dogs with Avascular Necrosis, Degenerative Joint Disease and Trauma of the Coxofemoral Joint," Veterinary Surgery, 41 (5), 551-558.
• Hamed, E., Y. Lee, T. Liszka, and I. Jasiuk (2012), "Multiscale Modeling of Elastic Moduli of Trabecular Bone," Journal of the Royal Society Interface, 9 (72), 1654-1673.
• Ambekar, R., M. Chittenden, I. Jasiuk, and K.C. Touissant (2012), "Investigation of Age-Related Structural Changes in Porcine Cortical Bone using Quantitative Second-Harmonic Generation Microscopy," Bone, 50, 643-650.
• Hamed, E., E. Novitskaya, J. Li, P.-Y. Chen, I. Jasiuk, and J. McKittrick (2012), "Elastic Moduli of Untreated, Demineralized, and Deproteinized Cortical Bone: Experiments and Modeling," Acta Biomaterialia, 8, 1080-1092.
• Chennimalai Kumar, N., J.A. Dantzig, and I. Jasiuk (2012), "Modeling of Cortical Bone Adaptation in a Rat Ulna: Effect of Frequency," Bone, 50, 792-797.
• Novitskaya, E. E., P.-Y. Chen, E. Hamed, J. Li, V. Lubarda, I. Jasiuk, and J. McKittrick (2011), "Recent Advances on the Measurement and Calculation of the Elastic Moduli of Cortical and Trabecular Bone: A Review," Theoretical and Applied Mechanics Journal, 38(3), 209-303.
• Chennimalai Kumar, N., I. Jasiuk, and J. A. Dantzig (2011), "Dissipation Energy as a Stimulus for Cortical Bone Adaptation," Journal of Mechanics of Materials and Structures, 6, 303-319.
• Hussainova, I., I. Jasiuk, X. Du, and M. Antonov (2011), "Characterization of Microstructure and Mechanical Properties of Cermets at Micro- and Macro- scales," International Journal of Materials and Product Technology, 40, 58-74.
• Feng, L., D. J. Milner, C. Xia, H.L.D. Nye, P. Redwood, J. A. Cameron, D.L. Stocum, N. Fang, and I. Jasiuk (2011), "Xenopus Laevis as A Novel Model to Study Long Bone Critical-Size Defect Repair by Growth Factor-Mediated Regeneration," Tissue Engineering A, 17(5-6), 691-701.
• Feng, L., and I. Jasiuk (2011), "Multiscale Characterization of Swine Femoral Cortical Bone," Journal of Biomechanics, 44(2), 313-320.
• Feng, L. and I. Jasiuk (2010), "Effect of Specimen Geometry on Tensile Strength of Cortical Bone," Journal of Biomedical Materials Research: Part A, 95A(2), 580-587.
• Hussainova, I., E. Hamed, and I. Jasiuk (2010), "Nanoindentation Testing and Modeling of Chromium-Carbide Based Composites," Mechanics of Composite Materials, 46, 667-678.
• Hamed, E., Y. Lee, and I. Jasiuk (2010), "Multiscale Modeling of Elastic Properties of Cortical Bone," Acta Mechanica, 213, 131-154.
• Chennimalai Kumar, N., J. A. Dantzig, I. Jasiuk, A. G. Robling, and C.H. Turner (2010), "Numerical Modeling of Long Bone Adaptation due to Mechanical Loading: Correlation With Experiments,"Annals of Biomedical Engineering, 38, 594-604.
• Wang, C., L. Feng, and I. Jasiuk (2009), "Scale and Boundary Conditions Effects on Apparent Elastic Moduli of Trabecular Bone modelled as a Periodic Cellular Network,"Journal of Biomechanical Engineering, 131, 121008-1-11.
• Hussainova, I., I. Jasiuk, M. Sardela, and M. Antonov (2009), "Micro-Mechanical Properties and Erosive Wear Performance of Chromium Carbide Based Cermets," Wear, 267, 152-159.
• Turner, C.H., S.J. Warden, T. Bellido, L.I. Plotkin, N. Kumar, I. Jasiuk, J. Dantzig, and A.G. Robling (2009), "Mechanobiology of the Skeleton," Science Signaling, 2(68), pt3 1-4.
• Jasiuk, I. (2009), "Stress Invariance and Exact Relations in Mechanics of Composite Materials: Extensions of the CLM results: A Review," Mechanics of Materials, 41, 394-404.
• Jordan, J., I. Jasiuk, and A. Zubelewicz (2008), "New Micromechanics-based Technique for Solving a Concentrated Force on a Half Plane," Journal of Mechanics of Materials and Structures, 3, 697-705.
• Tannenbaum, R., M. Zubris, K. David, D. Cipriani, K. Jacob, I. Jasiuk, and N. Dan (2006), "Characterization of the Reactive Interface of Cobalt Oxide Nanoparticles Embedded in Polymeric Matrices," Journal of Physical Chemistry B, 110, 2227-2232.
• Yoo, A. and I. Jasiuk (2006), "Couple-Stress Moduli of a Trabecular Bone Idealized as a 3D Periodic Cellular Network," Journal of Biomechanics, 39, 2241-2252.
• Rubin, M. and I. Jasiuk (2005), "The TEM Characterization of the Lamellar Structure of Osteoporotic Human Trabecular Bone," Micron, 36, 653-664.
• Jordan, J., K. Jacob, R. Tannenbaum, M. Sharaf, and I. Jasiuk (2005), "Experimental Trends in Polymer-Matrix Nanocomposites: A Review," Materials Science & Engineering A, 393, 1-11.
• Jasiuk, I. and M. Ostoja-Starzewski (2004), "Modeling of Bone at a Single Lamella Level," Biomechanics and Modeling in Mechanobiology, 3, 67-74.
• Taylor, J. and I. Jasiuk (2004), "Technical Note on the Preparation of Un-decalcified Trabecular Bone for Examination by TEM," Microscopy Today, Microscopy 101, 44.
• Rubin, M. A., J. Rubin, and I. Jasiuk (2004), "SEM and TEM Study of the Hierarchical Structure of C3H/HeJ and C57BL/6J Mice Trabecular Bone," Bone, 35, 11-20.
• Jasiuk, I. and M. Ostoja-Starzewski (2003), "On the Reduction of Constants in Planar Cosserat Elasticity with Eigenstrains and Eigencurvatures," Journal of Thermal Stresses, 26, 1221-1228.
• Rubin, M. A., I. Jasiuk, J. Taylor, J. Rubin, T. Ganey, and R. Apkarian (2003), "TEM Analysis of the Nanostructure of Normal and Osteoporotic Human Bone," Bone, 33, 270-282.
• Park, J. E., I. Jasiuk, and A. Zubelewicz (2003),"Interfacial Stress Analysis and Fracture of a Bi-Material Strip with a Heterogeneous Underfill," ASME Journal of Electronic Packaging, 125, 400-413.
• Baxter, W. J., A. Al-Ostaz, and I. Jasiuk (2003), "Fatigue of Kaowool Reinforced Aluminum: Effect of Shot Particle Wall Thickness," Journal of Materials Science, 38, 2851-2860.
• Park, J. E., I. Jasiuk, and A. Zubelewicz (2003), "Stresses and Fracture at the Chip/Underfill Interface in Flip-Chip Assemblies," ASME Journal of Electronic Packaging, 125, 44-52.
• Jasiuk, I. and S. Boccara (2002), "On the Reduction of Constants in Plane Elasticity with Eigenstrains," Archives of Mechanics, 54, 5-16.
• Jiang, M., I. Jasiuk, and M. Ostoja-Starzewski (2002), "Apparent Thermal Conductivity of Periodic Two-dimensional Composites," Computational Materials Science, 25(3), 329-338.
• Bouyge, F., S. Boccara, I. Jasiuk, and M. Ostoja-Starzewski (2002), "A Micromechanically Based Couple-Stress Model of an Elastic Orthotropic Two-phase Composite," European Journal of Mechanics/A: Solids, 21:3, 465-481.
• Jiang, M., I. Jasiuk, and M. Ostoja-Starzewski (2002), "Apparent Elastic and Elastoplastic Behavior of Periodic Composites," International Journal of Solids and Structures, 39, 199-212.
• Jiang, M., K. Alzebdeh, I. Jasiuk, and M. Ostoja-Starzewski (2001), "Scale and Boundary Conditions Effects in Elasticity of Random Composites," Acta Mechanica, 148, 63-78.
• Baxter, W. J., A. Al-Ostaz, and I. Jasiuk (2001), "Mechanical and Thermal Stresses at Shot Particles during Fatigue of Kaowool Aluminum Composites at 20oC," Journal of Materials Science, 36, 1201-1212.
• Jiang, M., M. Ostoja-Starzewski, and I. Jasiuk (2001), "Scale-dependent Bounds on Effective Elastoplastic Response of Random Composites," Journal of the Mechanics and Physics of Solids, 49, 655-673.
• Bouyge, F., M. Ostoja-Starzewski, and I. Jasiuk (2001), "A Micromechanically Based Couple-stress Model of an Elastic Two-phase Composite," International Journal of Solids and Structures (special issue Mechanics Pan-American 2001), 38, 1721-1735.
• Jasiuk, I., J. Dundurs, and M. Jiang (2000), "On the Reduced Parameter Dependence of the Mori-Tanaka Theory," Materials Science & Engineering A, 285, 130-135.
• Tsuchida, E., Y. Arai, K. Nakazawa, and I. Jasiuk (2000), "The Elastic Stress Field in a Half-Space Containing a Prolate Spheroidal Inhomogeneity Subject to Pure Shear Eigenstrain," Materials Science & Engineering A, 285, 239-245.
• Ostoja-Starzewski, M., S. Boccara, and I. Jasiuk (1999), "Couple-Stress Moduli and Characteristic Length of a Two Phase Composite," Mechanics Research Communications, 26, 387-396.
• Baxter, W. J., A. Al-Ostaz, and I. Jasiuk (1999), "The Effect of Shot Particles on the Fatigue of Kaowool Fiber Reinforced 339 Aluminum," Metallurgical & Materials Transactions, 30A 195-201.
• Wang, W. and I. Jasiuk (1998), “Effective Elastic Constants of Particulate Composites with Inhomogeneous Interphases,” Journal of Composite Materials, 32, 1391-1424.
• Markenscoff, X. and I. Jasiuk (1998), “On Multiple-Connectivity and the Reduction of Constants for Composites with Body Forces,” Proceedings of the Royal Society of London, Series A, 454, 1357-1369.
• Alzebdeh, K., A. Al-Ostaz, I. Jasiuk, and M. Ostoja-Starzewski (1998), "Fracture of Random matrix-inclusion composites: scale effects and statistics," International Journal of Solids and Structures, 35, 2537-2566.
• Al-Ostaz, A., I. Jasiuk, and M. Lee (1998), "Circular Inclusion in a Half-Plane: Effect of Boundary Conditions,” ASCE Journal of Engineering Mechanics, 124, 293-300.
• Dundurs, J. and I. Jasiuk (1997), “Effective Elastic Moduli of Composite Materials: Reduced Parameter Dependence,” Applied Mechanics Reviews, 50, (No. 11, Part 2), S39-S43.
• Al-Ostaz, A. and I. Jasiuk (1997), "Crack Initiation and Propagation in Materials with Randomly Distributed Holes,” Engineering Fracture Mechanics, 58, 395-420.
• Ostoja-Starzewski, M., P. Y. Sheng, and I. Jasiuk (1997), “Damage Patterns and Constitutive Response of Random Matrix-Inclusions Composites,” Engineering Fracture Mechanics, 58, 581-606.
• Jasiuk, I., P. Y. Sheng, and E. Tsuchida (1997), “A Spherical Inclusion in an Elastic Half-Space under Shear,” ASME Journal of Applied Mechanics, 64, 471-479.
• Al-Ostaz, A. and I. Jasiuk (1997), "The Influence of Interphase and Arrangement of Inclusions on Local Stresses in Composite Materials,” Acta Materialia, 45, 4131-4143.
• Ostoja-Starzewski, M., I. Jasiuk, W. Wang and K. Alzebdeh (1996), “Composites with Functionally Graded Interfaces: Mesocontinuum Concept and Effective Transverse Conductivity,” Acta Materialia, 44, 2057-2066.
• Jasiuk, I. and M. Ostoja-Starzewski (1995), “Planar Cosserat Elasticity of Materials with Holes and Intrusions,” Applied Mechanics Reviews, 48, S11-S18.
• Ostoja-Starzewski, M. and I. Jasiuk (1995), “Stress Invariance in Planar Cosserat Elasticity,” Proceedings of the Royal Society of London, Series A, 451, 453-470.
• Ostoja-Starzewski, M., K. Alzebdeh, and I. Jasiuk (1995), “Linear Elasticity of Planar Delaunay Networks – III: Self-consistent Approximations,” Acta Mechanica, 110, 57-72.
• Jasiuk, I. (1995), “Polygonal Cavities vis-à-vis Rigid Inclusions: Effective Elastic Moduli of Materials with Polygonal Inclusions,” International Journal of Solids and Structures, 32, 407-422.
• Ostoja-Starzewski, M., P. Y. Sheng, and I. Jasiuk (1994), “Influence of Random Geometry on Effective Properties and Damage Formation in Composite Materials,” ASME Journal of Engineering Materials and Technology, 116, 384-391.
• Jasiuk, I., J. Chen, and M. F. Thorpe (1994), “Elastic Moduli of Two Dimensional Materials with Polygonal Holes,” Applied Mechanics Reviews, 47, (1, Part 2), S18-S28.
• Jun, S. and I. Jasiuk (1993), “Elastic Moduli of 2D Composites with Sliding Inclusions – A Comparison of Effective Medium Theories,” International Journal of Solids and Structures, 30, 2501-2523.
• Jasiuk, I. and M. W. Kouider (1993), “The Effect of an Inhomogeneous Interphase on the Elastic Constants of Transversely Isotropic Composites,” Mechanics of Materials, 15, 53-63.
• Thorpe, M.F. and I. Jasiuk (1992), “New Results in the Theory of Elasticity for Two-Dimensional Composites,” Proceedings of the Royal Society of London, Series A, 438, 531-544.
• Lee, M., I. Jasiuk, and E. Tsuchida (1992), “The Sliding Circular Inclusion in an Elastic Half-Plane,” ASME Journal of Applied Mechanics, 59, 557-564.
• Jasiuk, I., J. Chen, and M. F. Thorpe (1992), “Elastic Moduli of Composites with Rigid Sliding Inclusions, Journal of the Mechanics and Physics of Solids, 40, 373-391.
• Jasiuk, I., E. Tsuchida, and T. Mura (1991), “Spheroidal Sliding Inclusion in an Elastic Half-Space," Applied Mechanics Reviews, 44:11, S143-S149.
• Lee, M. and I. Jasiuk (1991), “Asymptotic Expansions for the Thermal Stresses in Bonded Semi-infinite Bi-material Strips,” ASME Journal of Electronic Packaging, 113, 173-177.
• Shibata, S., I. Jasiuk, T. Mori, and T. Mura (1990), “Successive Iteration Method Applied to Composites Containing Sliding Inclusions: Effective Modules and Inelasticity,” Mechanics of Materials, 9, 229-243.
• Jasiuk, I., T. Mura, and E. Tsuchida (1988), "Thermal Stresses and Thermal Expansion Coefficients of Short Fiber Composites with Sliding Interfaces," ASME Journal of Engineering Materials and Technology, 110, 96-100.
• Jasiuk, I., E. Tsuchida, and T. Mura (1987), “The Sliding Inclusion under Shear,” International Journal of Solids and Structures, 23, 1373-1385.
• Mura, T., I. Jasiuk, and E. Tsuchida (1985), “The Stress Field of a Sliding Inclusion,” International Journal of Solids and Structures, 21, 1165-1179.

Teaching Honors

• UIUC List of Teachers Ranked as Excellent by their Students - Spring 2018
• UIUC List of Teachers Ranked as Excellent by their Students - Spring 2013
• UIUC List of Teachers Ranked as Excellent by their Students – Spring 2008
• “Most Helpful Professor,” Teaching Award, Georgia Tech, 2002

Research Honors

• Richard W. Kritzer Faculty Scholar, 2023-present
• American Advanced Materials Award (AAM Award) 2016, International Association of Advanced Materials
• Associate in the Center for Advanced Studies, 2017-2018
• Distinguished Fellow of the Collegium of Eminent Scientists of Polish Origin and Ancestry - The Kosciuszko Foundation, 2015
• Fellow, Society of Engineering Science, 2012
• Fellow, American Society of Mechanical Engineers, 2003

Public Service Honors

• BMTS Executive Committee (2023-present) (The Carle Illinois College of Medicine)
• Promotion and Tenure Committee, 2024
• Faculty Recruiting Committee, Department Level (2022-present)
• Admissions Committee (The Carle Illinois College of Medicine) (2018-2021)
• Appointment, Promotion, and Tenure Committee (The Carle Illinois College of Medicine) (2019-present), vice-Chair (2020-2021), Chair (2021-2022)
• Women's Leadership Council - Orthopedic Research Society (2017-2020)
• Promotion and Tenure Committee, College level, 2019-2021
• Seminar Committee, Department level, 2018-present)
• Promotion and Tenure Committee, Department level, 2016-2018
• Institute for Genomic Biology Advisory Committee 2016-2017
• Faculty liaison for the BiRmingham-Illinois Partnership for Discovery, EnGagement and Education (BRIDGE) initiative
• Women and Gender in Global Perspectives (WGGP) Executive Committee
• Women and Gender in Global Perspectives (WGGP) affiliate
• Chair of Bylaws Committee, Society of Engineering Science, 2012
• Member of Nominating Committee, Society of Engineering Science, 2011-2012
• Chair of By-Laws Committee, Society of Engineering Science, 2007
• Chair of Awards Committee, Society of Engineering Science, 2004
• Chair of Nominating Committee, Society of Engineering Science, 2002-2003
• Member of Board of Directors, Society of Engineering Science, 2000-2006
• Chair, American Society of Mechanical Engineers, Applied Mechanics Division Composites Committee, 2004
• Vice-Chair, American Society of Mechanical Engineers, Applied Mechanics Division Composites Committee, 2003
• Awards committee, American Academy of Mechanics (2007-2008)
• SES representative to the US National Committee on Theoretical and Applied Mechanics, 2007-2010
• President, Society of Engineering Science, 2006
• Vice-President, Society of Engineering Science (SES), 2005